CO/MO Detectors from Atwood using fuel cell technology.
Why have two separate alarms when you can have just one. Single unit detects
both LP and CO gases! Uses chassis and battery power to help protect your
family. ETL listed and tested to UL 2034, UL 1484 and CSA 6.19.00 for RV
applications. Cutout Dimensions are 3.44" W x 3.56" H
The Atwood LP/CO Alarm operates in Six separate modes:
- Power off Mode: Visually indicates
sufficient and insufficient power to the alarm.
- Gas Sensing Mode: Continually monitors gas
concentrations to ensure they're at acceptable levels.
- Alarm Active Mode: Indicates that one or
more gas concentrations have reached unsafe levels. Visually and audibly alarms
to alert to potential dangerous situation.
- Alarm Test Mode: Visually and audibly
verifies proper alarm operation
- Alarm Reset/Stabilization Mode: Silences
audio alarm for 6 minutes. Verifies proper alarm operation. If gas
concentrations are still high after the six minutes the alarm will sound once
again.
- Fault Mode: Indicates a fault has been
detected that compromises the alarm.