$14.99 Shipping Promotion applies to Online Orders with Standard Ground Shipping to the lower 48 US States only.
Some restrictions apply. Simply add items to your cart and enter your shipping address to see if your order qualifies.

Bulb Led Replacement #103 - 55-1052

Name: Bulb Led Replacement #103
Brand: AP Products Inc
SKU: 55-1052
Price: 17.8700 USD
Availability: InStock

$18.19

$17.87

Sale Prices Shown are Valid Until 04/26/24.

PRODUCT DESCRIPTION

Bulb Led Replacement #103

Item 55-1052 | MFR# 016-1036-25

Automotive LED Bulbs use 90% less power than comparable bulbs. This means you can run more than 10 of these with the same electrical power it would take to operate one comparable incandescent bulb. And using less power means less heat is generated, which practically eliminates the 'burning' of lenses of covered light fixtures.

These ultra-bright automotive LED bulbs have a 10,000 hour life expectancy without significant degradation of brilliance. That's 50 times longer than an incandescent bulb, who's brightness degrades rapidly. These bulbs produce more than twice the lumens than other LED bulbs of comparable wattage.

So that you may know the relative 'brightness' as measured in Lumen Output, please use the charts below to compare the Lumen Output and the power usage (Watts - Amps) of the the LED bulbs with the incandescent bulbs of a comparable base style.

Click for larger Image	Description	Lumen Output	Watts - Amps	Base Style	Comp. Chart	Our Part #
	Revolution 1156	170	2.59w - 0.216a	Single Contact BA15s	A	55-1053
	Revolution 1157	160/15	25.2/7.36w - 2.1/.59a	Double Contact BAY15d	A	55-1037
	Revolution 194	25	0.65w - 0.054a	Wedge - W2.1x9.5d	B	55-1007
	Revolution 1036	20	0.43w - 0.036a	Festoon - SV8.5-8	1-7/16" Long	55-1052
	Load Resistor					18-0053 Pack of 2

Comparison Chart A			Comparison Chart B
Incandescent Bulb	Lumen Output	Wattage - Amps	Incandescent Bulb	Lumen Output	Wattage - Amps
93	75	13.3w - 1.04a	194	10	3.3w - .27a
1003	75	12.0w - 0.938a	904	20.1	9.3w - 0.69a
1073	160	21.0w - 1.8a	906	30.1	9.3w - 0.69a
1093	76	15.2 - 1.19a	912	60.3	12.8w - 1.0a
1129	105	16.8w - 2.63a	916	10.0	7.3w - 0.54a
1141	104	18.4 - 1.44a	917	50.4	15.4w - 1.2a
1156	160	26.9w - 2.1a	918	32.7	7.2w - 0.56a
1157	160/15	25.2/7.36 - 2.1/.59	920	50.4	15.4w - 1.2a
1159	104	20.5w - 1.6a	921	105.5	18.0w - 1.41a
1295	251	37.5w - 3.0a	922	75.4	12.5w - 0.88a
1459	12	3.2w - 0.8a	923	60.4	11.6w - 0.91a
1619	76	12.7w - 1.9a
1651	15.2	3.0w - 0.6a
1680	160.4	24.6w - 4.1a
3497	226	25.2w - 2.1a
5007	20	5.0w - 0.417a
5008	50	10.0w - 0.833a
7506	185.6	21.0w - 1.75a
7527	100.4	18.0w - 1.5a

NOTE: In some vehicles the use of LED bulbs in turn-signal applications may not work properly. LED bulbs may cause some newer vehicles to indicate a bulb is burnt out (because of their low power consumption). Some cars indicate this by changing the flash rate of the turn signals (either very fast on very slow), and some turn on a bad bulb indicator. This can be remedied with Load Resistors wired into the turn signal circuit to simulate a filament bulb load. If LED 1157 bulbs are used in both front and back of the vehicle, only one resistor is needed in that circuit, but another resistor is needed in the circuit on the other side of the vehicle. It is recommended to install the bulbs and test them to see if resistors are needed. If replacing only one bulb, or using in trailer lights, there may be enough residual resistance in the circuit for the bulbs to operate properly. The Load Resistors are sold in packs of two.

A complete list of 12v LED bulbs coming soon.