
LP gas Water Heater from Suburban
The Suburban LP gas Water Heaters are known for their porcelain-lined steel tank and foam insulation that provides for long life. The high-recovery 12,000 BTU/hour units have a large diameter drain and replaceable anode rod. Heated water corrodes most metals, but the porcelain-lined steel tank features a replaceable anode rod that absorbs the destructive, corrosive action of heated water, ensuring that the entire system lasts longer. The anode rod is attached to the drain plug for easy replacement. Both 6- and 10-gallon LP gas units have 12,000 btu/hr input and an efficient recovery rate of 10.2 gallons/hour. Direct Spark or pilot ignition models offer an optional electric element to recover an additional 6 gallons/hour at the campsite.
All models offer a regulated safety thermostat and are designed with controls up front, for simple installation, operation and maintenance. Choose flush- or surface-mount door for 6 gallon models. All 10-gallon models require flush mount door (door sold separately).
The model SW10DE can supply the needs of larger RV's. This is an LP gas or 110 volt electric unit with direct spark ignition. The direct spark ignition eliminates the pilot light which can blow out.
Cut-out dimensions are: 6 Gallon; 12-3/4" high, 12-3/4" wide, 19-3/4" deep. 10 Gallon; 16-3/8" high, 16-3/8" wide, 20-3/4" deep.
Note: The Door is sold separately.
Order below.
These units come with a manufacturers three year limited warranty on tank, two year limited warranty on components. For additional information on all these water heaters, please visit the Suburban website. Clicking on the the above link will open a new browser window. Close the new browser window to return here.