This product is not available online, please call us at 1-800-755-4775 for more information.
Ball Mounts in Various Styles
These Ball Mounts are reversible and come in all popular sizes. The ball mounts or
utility hitch bar length is determined by measuring from the center of the pull
pin hole to the center of the hitch ball hole.
For safe and comfortable towing the trailer should always be set up to tow on
a level plane. If, on level ground, the coupler of the level trailer should be
at the same height as the ball on the towing vehicle. If not, a ball mount with
a "Rise" or a "Drop" is required to level the trailer.
The drop or rise is determined by measuring from the top of the ball mount to
the top of the tongue. (See ball mount selection chart) All 2" x 2" ball mounts
shank holes are 1" except for #98-9004 which has a 3/4" hole. Use #98-4140
bushing to reduce 1" hole to 3/4".
Rated Capacity is 600 lbs. tongue weight, and 6000 lbs. trailer weight.