1. Insert the spring nut into the shank tube of the tow
accessory as shown in figure 1. Make sure the nut threads ar in
alignment with the shank pin holes.
2. Slide the shank with the spring nut installed into the
hitch receiver and align the shank pin hole with the hitch receiver pin
3. Place the lock washer on the Silent Hitch Pin and insert
it through the hole in the receiver as shown.
4. Thread the Silent Hitch Pin into the spring nut, then
slide the metal sleeve over the pin and attach the lock (the look of
the lock will vary depending on the Silent Hitch Pin model purchased).
Tighten firmly with a wrench for proper function.