Some restrictions apply. Simply add items to your cart and enter your shipping address to see if your order qualifies.
Stable Load - A7310 - 92-1834
Stable Load - A7310
Torklift StableLoad Activates Overload Springs for Improved Stability.
StableLoads by Torklift are designed to dramatically improve the handling characteristics of your loaded vehicle by "pre-loading" the factory overload spring. The Quick Disconnect StableLoad Series (patent pending) incorporates a unique design that allows the StableLoad to quickly engage or disengage your overloads, enabling your vehicle to return to the soft stock ride in just seconds. This is accomplished by bolting each of the four StableLoads onto each overload end (two per passenger side, two per driver side). The Quick Disconnect StableLoad Series is designed with a tapered wedge mounted to a hinge mechanism that allows the StableLoad to be hinged in or out of position using a common 3/8" ratchet extension and ratchet.
Please click here for Non-Quick Disconnect Stableloads.
Things to consider:
- The chart below indicates which model vehicles require no drilling for installation of Torklift Stableloads.
- A7310 Quick Disconnect is specified where drilling is not required in the lower overload spring.
- The A7311 is the same Quick Disconnect kit, but with drill bits and instructions for drilling the holes, therefore enabling installation on any truck or RV with lower overload springs. SPECIAL ORDER
- Before ordering your StableLoad overload kit, please first verify that your vehicle came equipped with factory overloads, and what type of overload, upper overload or lower overload your vehicle is equipped with. Click here to access the manufacturer's application guide.
- The StableLoad functions equally as well when used with or without airbag overloads. For vehicles that do not yet have airbag overloads we recommend starting with the StableLoad prior to investing in airbags.
Some of the features of the Torklift Stableload include a lifetime warranty, quick and simple installation without the need for drilling, a lower air spring pressure, and an angled design which helps to maximize the spring contact surface of the vehicle.
|STABLELOAD APPLICATION GUIDE - (Order Below)|
|YEAR||MAKE / MODEL||NEW|
Van - SUV
RV - etc.
|85-08||F150 - F450|
|09-12||F150 - F450|
|00-12||F450 / F550|
Cab & Chassis
|94-12||1500 - 4500||A7311**||A7200***||-|
|CHEVY / GMC|
|94-10||1500 - 3500||A7310*|
|Before ordering your StableLoad overload enhancer, please first verify that your vehicle came equipped with |
factory overloads, and what type of overload, upper overload or lower overload your vehicle is equipped with.
*A7300 Series Footnotes:
-A7300 SERIES StableLoad (A7300- A7301-A7310) are all NO DRILL APPLICATION and require factory
predrilled .5" diameter holes in lower overload spring.
-On NON-Quick Disconnect StableLoad (part#'s A7300- A7301) Due to wear and tear
after time, some vehicles leaf springs may have minimal clearance for the StableLoad when the vehicle is
unloaded. In this case minor stiffening in ride quality may be noticed with no load in the vehicle. If this is a concern,
purchase A7310 Quick DisconnectStableLoad.
-A7311 kit will fit any passenger or commercial vehicle, Van, SUV, Truck, RV etc. with rear leaf springs
and lower overload spring. The lower overload leaf can be identified by being on the very bottom of the spring pack,
being thicker than the rest of the leaf springs in the spring pack and generally speaking having a gap between the
lower overload leaf spring and the upper leaf spring pack.
-Drilling four 3/8 holes required. Special drill bits and detailed drilling instructions included.
-Average drill time is 30-40 minutes for complete installation
-Many factory overload springs come predrilled with 1/2" holes. Therefore drilling holes in the overload springs in the same
factory locations found on vehicles with predrilled holes will have no affect on your springs integrity or operation. The drilled
springs (when drilled in accordance with the Torklift International drilling specifications) and the integrity of the springs once
drilled are covered under the lifetime Torklift International warranty.
***A7200 Series Footnotes:
-Must have factory installed upper overload.
-Will not work in conjunction with Supersprings
-Due to factory overload engagement design, some applications have progressive engagement,
where rear springs will contact first.
-Drilling of rubber pad on some older Dodge applications may be required.
FREQUENTLY BOUGHT TOGETHER
StableLoad - Quick Disconnect with Drill Kit
Stable Load - A7200
More Details EXPAND
- Manufacturer Numbers
- A7310, 15-3181
- Free Ground Shipping
- Tork Lift
- UPC List
- Product Cross-Sells
- Related Products